The Engineer’s Guide to Tea Preparation

The bulk of tea produced in the world is commodity tea, meaning that it is actively traded and it’s price is determined by the markets. Commodity tea is relatively cheap, with the worldwide average price of commodity black tea typically in the area of $2.85USD/kilogram.

Many of the world’s famous tea cultures1 are famous because they are promulgated by common man and are thus largely based on cheap commodity tea. There is however, a larger amount of high quality tea being produced every year, what some are calling the specialty tea industry.

One way to think about the difference between commodity tea and specialty tea is that commodity tea production prioritizes quantity over quality and specialty tea production prioritizes quality over quantity.

What is quality? Leaf format is arguably the most important determining factor of quality for a tea and is inherently a function of the processing methods used to create it. In general2, lower quality (commodity) teas tend to be finely ground or made up of leaf particles very small in size, while higher quality (specialty) teas tend to be made up of full leaves or perhaps even more than one leaf and/or bud.

For this article, I’ll assume that you have acquired a high quality full-leaf tea. Let’s look at the factors that make for an exemplary cup of it.

Tea (the beverage) is made by infusing tea leaves in a solvent (water) to make a solution wherein the solute is made up of the soluble solids within the tea leaves. The resulting solution is on average 98% water and 2% compounds from within the leaf. The tea equation is made up of the soluble solids3 within the leaves (which can be generalized by type of tea), the surface area of the tea, the chemical properties of the water, atmospheric pressure, water temperature, and infusion time.

Type of Tea

The type of tea being steeped is the most important determinant when it comes to the types and amounts of soluble solids within tea leaves. Tea types are defined by the processing steps the leaves go through and thus, the resulting chemical components in the leaves are similar for all styles of tea within a type.

Across all tea types, the major chemical components in tea leaves fall into the following categories: polyphenols, amino acids, enzymes, pigments, carbohydrates, alkaloids, minerals and volatiles. Individual components in each category lend themselves to a portion of the cup in the form of taste, color or body.  The rate of dissolution of those components that are soluble in water depends on the surface area of the tea leaves, the chemical properties of the water, atmospheric pressure, water temperature, and infusion time.

Surface Area of Tea Leaves

The rate of dissolution of the soluble components in tea leaves increases with the surface area of the leaves. Thus, a ground tea with fine leaf particles will impart flavor and color in water quicker than an unbroken, full-leaf tea. Adding more full-leaf tea increases overall surface area within the solvent and will also increase the rate of dissolution.

Surface area of tea leaves

One gram each of CTC Assam black tea (left), Sun Moon Lake black tea (middle), and Ball-style Taiwan Oolong (right). Despite the fact that the same amount of each tea is pictured, the surface area of each varies greatly.

Chemical Properties of Water

The leaching qualities of water on a molecular level are either aided or impeded by pH levels, hardness levels, and mineral levels (often measured by TDS or total dissolved solids).

The pH level of drinking water should not be a huge concern when finding a water source for your tea, this is because pH levels will typically fall within the EPA’s recommended pH range of 6.5 – 8.5, any level within being fine for tea. A neutral pH is 7, water with a pH higher than 7 is considered basic or alkaline and will result in a darker tea infusion. Water with a pH lower than 7 is considered acidic and will result in a lighter tea infusion.

Water hardness refers to the amount of calcium and magnesium dissolved into a water supply. There are two kinds of hardness: temporary hardness and permanent hardness. Temporary hardness refers to the presence of calcium and magnesium bicarbonates and is known to dull the color of a tea infusion and promote the creation of tea scum. Tea scum is a nasty looking iridescent surface film on tea that will cling to the side of your glass as you drink it. Temporary hardness can be boiled out of the water – in doing so, it is converted to permanent hardness. Permanent hardness refers to calcium and magnesium carbonates in water, typically water softeners will dissolve these minerals with sodium. Tea polyphenols bind to the minerals in hard water resulting in a stronger and darker brew.

Good tasting water has a balance of minerals and a clean, even taste. Too high of a mineral content will make water taste tinny and metallic, too low and water tastes dull. Mineral content is often erroneously associated with total dissolved solids or TDS, a popular measure for the amount of solid materials dissolved into a water source. The Tea Association of the United States recommends using water with 50 – 150 ppm total dissolved solids to brew the best tea. However, this is not a reliable means for measuring mineral content as TDS is a measure of the total amount of solids that are dissolved in water, regardless of what those solids may be.

While TDS alone is not a reliable marker as to the quality of a water source, it is known that some levels of minerals in water are beneficial and actually enhance the flavor of tea. Too high of a mineral content and a tea will taste metallic, conversely, distilled water, void of minerals produces a flat tasting tea. Many tea and coffee shops will filter everything out of their water supply then add calcium, potassium, and sodium back into the water.

Atmospheric Pressure

Atmospheric pressure at sea level is around 14.7 psi, the boiling point there is 100°C.  Below sea level, where atmospheric pressure is higher, the boiling point of water rises above 100°C. Above sea level, where the atmospheric pressure is lower,  the boiling point of water dips below 100°C. This effect is exacerbated in several newfangled devices such as the bkon tea brewer which infuses tea in a vacuum. This low pressure environment allows boiling to occur at a temperature well below 100°C. Visit Engineering Toolbox to see a chart of boiling points at different levels of pressure.

Water Temperature

In general, heat increases the rate of dissolution of any solute in a solvent. A pattern you may have noticed is that most tea merchants recommend using cooler water for teas that are less oxidized (green teas, yellow teas, white teas, oolong teas) and hotter water for teas that are more oxidized (black teas, post-fermented teas). The main reason for this pattern is polyphenol content. During oxidation, catechins (a group of polyphenols) are converted to theaflavins and thearubigins (two other groups of polyphenols). These polyphenols, especially the catechins, are known for their bitterness and astringency and hot water draws them out of the leaves into solution more easily. Theaflavins and thearubigins present in oxidized teas not only contribute to taste but also are a large part of the color of the liquor.

To recap, a general rule of thumb (keeping the infusion time the same) is that teas that have a lower level of oxidation inherently have a higher level of catechins and taste better when steeped with cooler water. Teas that have a higher level of oxidation inherently have a lower level of catechins and taste better when steeped with hotter water.  Note that this is completely overly simplified, and that polyphenols, while they do make up a large proportion of soluble tea solids, are only one of the hundreds of compounds found in tea. Here’s a neat and nerdy trick to use to obtain water that is a specific temperature.

Infusion Time

Infusion time and temperature go hand in hand. You can obtain a similar color and taste of infusion steeping a tea at a hotter temperature for a shorter amount of time than you can steeping the same tea at a lower temperature for a longer amount of time. As different chemical components in the leaf are more or less soluble at different temperatures, results may vary, but I’ve done several dozen rounds of trials and found similar results with each of these infusion times and temperatures for green, white, oolong and black teas. The optimal infusion time and temperature for each has been highlighted in green4:

tea steeping chart

Basically, for each 20 degree rise in steeping temperature, the infusion time halves. Give it a try and see what you think.



  1. A list of world famous tea cultures would likely include: British Afternoon Tea, Indian Masala Chai, Moroccan Mint, Kashmiri Kahwah and many others.
  2. This is a generalization as matcha is ground and can be high quality.
  3. A large part of tea flavor comes from the volatile aroma compounds which exist in trace amounts. Volatile here means that these compounds are no longer solid.
  4. The optimal times and temperatures were derived using a blind taste test of 10 different full-leaf pure teas from each category.

About the Author:

Tony has been studying tea for over ten years and has traveled to many tea producing regions throughout Asia. His book, "Tea: A User's Guide" is available now.


  1. David June 27, 2017 at 8:19 pm - Reply

    Tony, Thank you for your nice article. You mentioned on the infusion temp chart the optimum temp highlighted in green. What ‘happens’ to the brew as you go cooler for longer in terms of
    1) yield
    2) ‘quality’
    I am experimenting with some really nice black teas and some pu-erhs, some of the blacks being mainly buds or tips and I don’t want to lose some of the smooth mouth feel, for ex, but I am trying to determine a brewing protocol to brew in one infusion and maximize my yield / taste. I realize there may be some compromise in yield if you are trying for optimum taste and visa versa. I am also experimenting with some vacuum infusion cycles using a vacuum chamber sealer / marinator but the cycle times are rather fixed and I have not determined if this adds anything to the yield or character of the tea.

  2. Sharad October 11, 2015 at 10:29 am - Reply

    Bro i need to know the acid strength of different tea leaves

  3. Indi Khanna August 12, 2015 at 4:06 am - Reply

    VERY concise and well written article.
    Puts it all in a very easily digestible nutshell.
    Would love to be kept in the loop with whatever further tea related information you put out.

  4. Hertfordshire Granite May 10, 2015 at 2:25 pm - Reply

    I LOVE this guide! The numbers fiend inside me is going ballistic with joy. Great work and can’t imagine how much time must have gone into this!

  5. Hertfordshire Granite May 10, 2015 at 2:24 pm - Reply

    LOVE this guide!

  6. Jonathan Dill May 10, 2015 at 1:15 pm - Reply

    Thanks for the ideas and the inspiration. I’m developing an idea for a gaiwan style tea timer app for multiple steeps. Eventually, I’d like to have some sort of equation for calculating steep times. Initially, I think I’ll build a database of recommended steep times from multiple sources and try to model them as an arithmetic sequence or series and see what I can learn from that. Right now, I’m just using Timer+ with a separate timer for each steep. I drink mainly Chinese oolong, green or white tea with a bit of Japanese style tea. Currently enjoying some pre-qingming green teas I ordered from Teavivre and expecting some Japanese kukicha in the mail.

  7. Arthur May 22, 2014 at 12:44 am - Reply

    Thanks but did you mean 1g to 100ml? 1g to 1ml would be extremely intense.

    • Tony Gebely May 22, 2014 at 6:47 am - Reply

      Heh, yes! Sorry for the mistype. 1gram leaf to 100ml water!

  8. Arthur May 18, 2014 at 11:12 pm - Reply

    Hello Tony, could you please tell us your tea leaf to water ratio in deriving your optimal infusion times & temperatures? Thanks!

    • Tony Gebely May 21, 2014 at 10:05 pm - Reply

      Hi Arthur,
      I used 1 gram leaf to 100ml water. If you run some tests, let me know how they go! Cheers!

      • James September 1, 2015 at 11:28 am - Reply

        Does that ratio go for all types of tea? Black, green, white etc.? Im looking for a good method to prepare white tea but every vendor has totally different recommendations for the same exact loose leaf silver needle. Makes my life confusing 🙁

  9. Balazs Henger May 17, 2014 at 10:16 am - Reply

    The spring flush is going off right now in Oregon. We have picked about 100 pounds of beautiful tips, lightly fermented and wok fried them into a wonderfully light and floral oolong. Tightly rolled and baked several times. I can’t stop drinking it. Organic leaf, grown, picked and processed in America. I will be sending you a sample upon your return.
    Thanks again for the great article, I am looking forward to your review and your book.

    • Tony Gebely May 17, 2014 at 10:17 am - Reply

      Thank you so much, I can’t even begin to tell you how excited I am to try your tea! Have a wonderful weekend!

  10. Mouraud May 14, 2014 at 6:44 am - Reply

    this article had been written on the 29th April 2014 or 2013 ? 🙂

    • Tony Gebely May 14, 2014 at 10:04 am - Reply


  11. Andrew Frenkiel May 8, 2014 at 12:07 pm - Reply

    An interesting article. As a tea lover I have never been convinced that quality and size of leaf rate directly related. I’m glad you confirmed this point. One aspect you have not covered is how the tea is brewed and served. When first introduced to England from China it arrived with bone china teapots and cups and since that time it has been regarded as the correct way to serve tea. This caused problem in England as in the 17th century English cup makers did not have the skills to make bone china cups which could stand up to the temperature necessary for serving tea. The cups would crack and one way round the problem was to put some cold milk in the cup before serving the tea. This is the ‘English’ way of serving tea. I drink my tea black and unsweetened and I therefore am sensitive to different tea tastes. One thing I have found is that the East European and Turkish way of serving tea in a glass considerably improves the taste. Also tea brewed in a stainless steel tea pot results in a superior flavour. This is of course contrary to tradition and therefore most tea consumers are not aware of this. It would be interesting to conduct a scientific analysis using blind tasting controls. Any thoughts on the matter?

    • Tony Gebely May 8, 2014 at 12:09 pm - Reply

      Thanks for the comment Andrew. I purposely did not cover this because no scientific research has been done on the topic yet and it really opens a can of worms. Tea is a complex beverage with so many variables. If you know of any research please let me know!

  12. SY May 5, 2014 at 4:12 am - Reply

    Nice concept let down by information too vague to be meaningful.

  13. JonathanH May 1, 2014 at 12:37 am - Reply

    Hi Tony, really great article… so much of what I’ve tried to explain to people in my tea masterclasses in such a concise and well explained article! 🙂

    Something I think worth looking at further however is the impression of ground tea or what I prefer to call smaller grade tea being inferior to larger grade or full leaf tea. I see in the footnotes that you’ve clarified this as a generalization but for some of the largest tea producing countries like India and Sri Lanka quality has little to do with the final format or grade being large or small. Some of the most amazing quality high grown seasonal tea from Sri Lanka that I’ve tried was produced as a smaller grade and in a very small batch. When steeped at the optimal temp & time it brought out a complexity that would be somewhat lost if left as a full leaf tea. The maceration of the leaf when rolled into a smaller grade can also help to coat the broken particles with solubles which impart a unique character if steeped to bring out the best all round balance. They sometimes benefit from a shorter steep or lower temp as well. The quality of the finished product is very much in the growing, the picking, the processing and the freshness retained through good storage soon after production. There are low quality large leaf teas as there are low quality small grade teas. As you’ve said of course the commodity teas are mostly finished as smaller grade to produce a stronger cup quicker and although the proliferation of machine harvesting and CTC processing has given to most people the impression that mass market tea is commodity tea and of low quality. That’s a shame. There are a number of brands producing what could be considered mass market tea but using handpicking and orthodox production to produce a very good quality product, often of better flavour and freshness than many of the ‘specialty’ tea brands that sell large leaf teas. There are many small brands springing up with full leaf teas marketed as specialty and priced at a premium when they are in reality poor quality and far from fresh. Of course I’m now generalizing because there a great deal springing up that truly source great quality tea as well.

    I’m obviously coming more from an Indian or Sri Lankan black tea perspective but I guess I’m just trying to say there’s many shades of black… and green… and white, well you get the point 😉

    Thanks again, would love to know your thought further to this.

    • Tony Gebely May 1, 2014 at 9:03 pm - Reply

      Thanks Jonathan! I like that you call it “smaller grade tea” because quality truly depends on what category you are looking at. I chose to look at tea as one big category from finely ground to full leaf. In this category, it will *generally* hold true that ground tea is lower quality than full leaf tea. If we split tea into categories by leaf format, you can definitely have a range of quality in each category. For example, you can have a very high quality CTC tea and you can have a very low quality full-leaf tea. The points you make are 100% valid and true, though, to keep the article semi-simplistic, I chose to lump things into a large singular category.

      • JonathanH May 1, 2014 at 9:31 pm - Reply

        Totally understand and agree, it certainly wouldn’t have been that wonderfully concise article if you’d tried to expand too much… look forward to the extended version in the book! 🙂

  14. Geoff (Steep Stories) April 29, 2014 at 3:44 pm - Reply

    Aaaand, this is why you’re the king of teablogging.

    I hate you….with love 🙂 And mad props.

    • Chris Giddings April 29, 2014 at 4:51 pm - Reply

      You and me both Geoff. You and me both.

Leave A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

World of Tea is now part of the American Specialty Tea Alliance. Learn More.